4421 Tradition Trail ● Plano, Texas 75093 ● 972-964-2700 ● 800-836-7472
URL:
www.iscenclosurecooling.com
● Email:
SP-ENG-211-100-11 Rev 1.5
26
|
P a g e
Appendix A
Wago Power Terminal Block Instructions
Scope: Instructions for connecting power wires to air conditioners equipped with
a “Wago” power terminal
block.
1 - Remove cover from chassis using T25 Torx bit.
2 -The sequence of the connecting the wires is from LEFT TO RIGHT.
3 - Connect each wire as shown by lifting the lever and inserting the wire into the receptacle directly below.
Snap the lever down to secure the wire in place.
4
– If wires need to be removed, raise the lever directly above each wire to release it.
1. Line1
2. Line2
3.
NA
4. Ground
