DRFF-530 Screw Feeder
Operation and Setup Manual
www.deltaregis.com
10
Filling the Hopper
Before filling the hopper, turn the machine OFF.
Remove the hopper cover. Check for debris or foreign objects.
Fill the hopper with screws leaving a minimum of 2 mm space
under the rail for thread lengths up to 5mm, 4mm space for
thread lengths over 5mm.
The hopper capacity is approximately 500cc (30.51ci).
Mixed screws, debris and/or foreign objects must be removed
to prevent poor performance.
2mm
2mm
4mm
4mm