Delta-q NDIQ 7323, Instruction Manual

Page: 19 / 76

EN INSTRUCTIONS AND MODE OF USE
18
PERSONALISED SETTINGS
The control panel buttons can also be used to personalise the
dosages of the different drinks.
Programming the espresso extraction button.
Note: The pre-defined factory volume for the espresso extraction
button is around 30cc.
• To alter the volume of your beverage, ensure the machine is ON (see
Fig.5 ), check whether there is any water in the water tank and
wait until the control panel buttons indicate “Ready to use”
(see
Fig. 7
).
• Then press the espresso extraction button until the indicator
lights of the coffee and the tea extraction buttons start blinking.
Press the espresso extraction button (see
Fig. 17
).
The indicator lights of the coffee and the tea extraction
buttons go out.
Note: If the user does not press again the coffee extraction button
after 1 minute, the equipment will revert automatically to the
“Ready to use” mode.
• As soon as extraction has reached the desired dosage, press the
espresso extraction button again and the operation is complete.
The equipment memorises this volume and will start extracting
it until new programming has been defined.
• After completing extraction, the equipment returns to “Ready
to use” mode (see Fig. 7 ).
Note: If the user fails to press the extraction button to complete
the operation, the equipment will automatically assume the
volume around of 75cc.
Fig. 17:
Programming the espresso
extraction button.
A. B. C.
A. B. C.