Delta OHM HD32MT.3, Operating Manual

Page: 46 / 62

HD32MT.3
- 46 -
V1.2
Command Description P
PORTALURLADDRESS c...c Sets the string c...c as Internet address of the Delta OHM portal.

PORTALPORTNUM Prints the port number of the Delta OHM portal.
If the port number is not set, the datalogger responds "? VOID |".

PORTALPORTNUM n...n Sets to the value n...n the port number of the Delta OHM portal.

PORTALSERVER Prints the folder path for saving data in the Delta OHM portal.
If the path is not set, the datalogger responds "? VOID |".

PORTALSERVER c...c Sets the string c...c as folder path for saving data in the Delta OHM
portal.
Note: at the end of the string c...c it is automatically added the da-
ta logger serial number, followed by /data for the logged data or
/config for the configuration data. Example: if the data logger se-
rial number is 1506250906 and c...c =MyFolder/, the folder with
the logged data will be “MyFolder/1506250906/data”.

DATAPOST Sends immediately the logged data that have not been sent yet to
the Delta OHM portal.

CONFPOST Sends the data logger configuration to the Delta OHM portal.

11.19 TCP/IP
CONNECTION
If the GSM/UMTS module is installed, you can establish a direct TCP/IP connection to a remote
server over the Internet and interact with the PC (server) with the data logger as if there was a
direct cable connection.
The connection can be established on demand (with the command TCPCONNECT) or automati-
cally at regular intervals (setting with the command TCPIPSEARCH the option to connect auto-
matically at regular intervals).
The data logger allows you to set the symbolic address of the web server to be reached (for ex-
ample, "www.myserver.com"), which must be translated into the IP address of the server from a
DNS service at the time of connection request. If the server to be reached has a static IP ad-
dress, the service is done by the default DNS server of the Internet provider. If the server to be
reached has a dynamic IP address, you must register the server to a DDNS (Dynamic DNS) ser-
vice and set as symbolic web address in the data logger the complete host name used during the
registration.
Command Description P
RAWTCPADDR Prints the set web address of the server for the TCP/IP connection.

RAWTCPADDR c...c Sets the string c...c as web address of the server for the TCP/IP con-
nection.

RAWTCPPORT Prints the setting of the port number on which the remote server listens
for the request for TCP/IP connection.

RAWTCPPORT n Sets to the value n the number of the port on which the remote server
listens for the request for TCP/IP connection.
It is advisable to avoid the port numbers assigned to standard services
(ftp, http, smpt, etc.).
On the server there must be installed a communication application pro-
gram set as the server and waiting for connection request by port n.

TCPIPKEYSTRING Prints the setting of the recognition string sent by the datalogger at the
time of TCP/IP connection.

TCPIPKEYSTRING c...c Sets the string c...c as a string of recognition sent by the logger at the
time of TCP/IP connection

TCPCONNECT Starts TCP/IP connection.

TCPCLOSE Closes TCP/IP connection.

TCPIPSEARCH Prints the setting for the automatical TCP/IP connection at regular inter-
vals.
