HD2109
- 7 -
V2.4
HD2109.2
1.
8-pole DIN45326 connector, input for dissolved oxygen and temperature combined probes,
for Pt100 SICRAM temperature probes and direct 4-wire Pt100 probes complete with TP47
module.
2.
External auxiliary power supply connector input (positive at centre).
3.
Battery symbol: displays the battery charge level.
4.
Function indicators.
5.
Secondary display line.
6.
CAL/
key: during normal operation starts the dissolved oxygen probe calibration; in the
menu, increases the current value.
7.
FUNC/ENTER
key: during normal operation displays the maximum (MAX), the minimum
(MIN) and the average (AVG) of current measurements; in the menu, confirms the current
selection. This updates the display measurement when the
Auto-Hold
function is enabled.
8.
REL/
key: enables the relative measurement (displays the difference between the current
value and the logged value when the key is pressed); in the menu, decreases the current
value.
9.
SERIAL/ERASE LOG
key: starts and ends the data transfer to the serial communication
port. In the menu, clears the data contained in the instrument's memory.
10.
LOG/DUMP LOG
key: during normal operation, starts and ends the saving of the data in
the internal memory; in the menu, starts the data transfer from the instrument's memory to
the PC.
11.
Mini-USB type B connector for USB 2.0. For the connection to PC (with cable CP23).
12.
MENU
key: allows access to and exit from the menu.
13.
mg/l-%-ESC
key: cyclically changes the main variable measurement between:
•
dissolved oxygen concentration (in mg/l),
•
saturation index (in %),
•
barometric pressure (in mbar).
In the menu, cancels the operation in progress without making changes.
14.
°C/°F
key: when the probe is not connected, allows manual modification of the temperature.
When a probe with temperature sensor is connected, pressing this key twice changes the unit
of measurement from degrees Celsius to Fahrenheit.
15.
ON-OFF/AUTO-OFF
key: turns the instrument on and off; when pressed together with the
CAL key, disables the automatic turn off.
16.
MAX, MIN and AVG symbols.
17.
Main display line.
18.
Line for symbols and comments.
19.
8-pole MiniDin connector for RS232C. For the connection to PC (with cable HD2110CSNM
or C206) or printer (with cable HD2110CSNM).
Summary of Contents for HD2109.1
