7
HELPLINE No. U K / N.IRELAND 0800 328 60 20 REP. IRELAND 00 800 44 67 58 88
E-MAIL SUPPORT [email protected]
Model Number: GT-CPM-01
Prior to first use
Unpack
1.
Take the device and its accessories out of the packaging.
2.
Carefully remove all packaging material and completely unwind the power cable.
3.
Check whether all parts are present and intact.
Cl heating
Prior to the first use, you should initially clean the device in order to remove dust and
possible packaging and production residues. After doing this, heat up the Crepe Maker
without any foodstuffs and clean it once again after it cools down.
DANGER
- risk of fire / burns
- The baking plate is hot while being used. Refrain from touching it.
- Do not leave the device unattended it is being heated or is still cooling down.
- Allow the Crepe Maker to completely cool down before you clean it or pack it
away.
The first use of the device might result in a slight smell. This is harmless. Provide
for sufficient ventilation; for example, by means of an opened window.
1.
Clean all parts of the Crepe Maker, as described in the section entitled "Cleaning"; see
page 9.
2.
Place the base on an even, heat-resistant surface.
3.
Place the baking plate on the base.
4.
Insert the power plug into a power outlet.
The red control light indicates that the device is being supplied with electricity.
5.
Turn the temperature controller to the maximum position
MAX
. After a brief period
of heating up, the green control light is also illuminated.
Even if the temperature controller is at
MIN
, the green control light stays illumi-
nated. However in principle, the baking plate is not heated in the
MIN
position.
6.
After a few minutes, turn the temperature controller back to
MIN
and pull the plug
from the power outlet.
7.
Allow the device to cool down.
8.
Wipe the baking plate clean with a soft, lightly moistened cloth.
The Crepe Maker is ready for use.
