16 | www.deltaheat.com
CLEANING & MAINTENANCE - CONT.
In the event that surface corrosion has developed on the stainless steel, it is typically not the stainless
steel that is corroding but corrosive particles that have been deposited on the surface.
WARNING:
It is recommended that your Delta Heat products be kept dry and covered when not in use. This is
even more important when long-term storage is intended.
If you are located along the coast or in the desert, wind driven sand is extremely abrasive and can pit
and scratch the stainless steel. Keep your Delta Heat products covered when not in use.
When routine cleaning, maintenance and awareness of the conditions outlined above, you can enjoy
many years of service from your Teppanyaki Griddle.
KEEP IN MIND:
Delta Heat products are made of all welded stainless steel. It is non-rusting and non-magnetic. Never
clean the stainless steel when it is hot. After the initial use, certain areas of the griddle may discolor.
This is a normal discoloration caused by the stainless steel being exposed to high heat.
Grease Tray
•
The grease tray collects grease, liquid and food particles.
It is highly recommended to clean the tray after every use
to avoid any possibility of a grease fire.
• Allow the tray and its contents to cool before cleaning.
The grease tray is located in front of the griddle plate
assembly. Slightly tilt the grease tray forward and lift the
tray to remove it from the griddle plate assembly. Wipe
the grease tray clean with a cloth and a hot soapy solution.
Make sure the grease tray is fully inserted back into the
Teppanyaki Griddle again
Flue Cover
• The Flue Cover Assembly is located at the back of the griddle plate as-
sembly. Wipe the flue cover clean with a cloth. You may also remove it for
cleaning with a hot soapy solution. Make sure the flue cover is fully insert
-
ed back into the Teppanyaki Griddle again.
