background image

 

 

VIVOTEK

 

94 - User's Manual

Network > Streaming protocols  

HTTP streaming 

To utilize HTTP authentication, make sure that your have set a password for the Network Camera 

first; please refer to Security > User account on page 107 for details.

Authentication: Depending on your network security requirements, the Network Camera provides 

two types of security settings for an HTTP transaction: basic and digest. 

If 

basic

 authentication is selected, the password is sent in plain text format and there can be 

potential risks of being intercepted. If 

digest

 authentication is selected, user credentials are 

encrypted using MD5 algorithm and thus provide better protection against unauthorized accesses.

HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP 

port is set to 8080. They can also be assigned to another port number between 1025 and 65535. If 

the ports are incorrectly assigned, the following warning messages will be displayed:

To access the Network Camera on the LAN, both the HTTP port and secondary HTTP port can 

be used to access the Network Camera. For example, when the HTTP port is set to 80 and the 

secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.

Access name for stream 1 ~ 3: This Network camera supports multiple streams simultaneously. 

The access name is used to identify different video streams. Users can click 

Media > Video > 

Stream settings

 to set up the video quality of linked streams. For more information about how to 

set up the video quality, please refer to Stream settings on page 74.

When using 

Mozilla Firefox 

to access the Network Camera and the video mode is set to JPEG, 

users will receive video comprised of continuous JPEG images. This technology, known as “server 

push”, allows the Network Camera to feed live pictures to Mozilla Firefox.

On the LAN
http://192.168.4.160  or  

http://192.168.4.160:8080

NOTE: 

The metadata information can only be transmitted through the HTTP main port. Metadata is not 

available through the secondary HTTP port. 

Summary of Contents for VIVOTEK CU9171




























































































































































































































































































































































































































Reviews: