background image

 

SPBD-155E4J1RD

 

DELTA ELECTRONICS, INC.

 

1 Revision: 

S1

04/11/2007

www.deltaww.com

 

Intelligent SFP Bi-Directional Transceiver Module 
for Fast Ethernet, ATM, SONET OC-3/SDH STM-1 

 

 

 

FEATURES 

 

RoHS compliant 

 

Digital Diagnostic SFF-8472, Rev. 9.5 MSA 
compliant 

 

Simplex LC connector with 1310nm 
Transmitter and 1550nm Receiver 

 

 3.3V power supply and TTL logic 
interface 

 

Bellcore GR-468 compliant 

 

Laser class 1 product which comply with the 
requirements of IEC 60825-1 and IEC 60825-2

Description 

The SPBD-155xxxxx series are hot pluggable 

3.3V Small-Form-Factor (SFP) Bi-Directional 
transceiver module designed expressly for 
high-speed communication applications that 
require rates of up to 155Mbit/sec. It is compliant 
with the Fast Ethernet, ATM, SONET OC-3/SDH 
STM-1 standards, as well as the SFP Multisource 
Agreement (MSA). 

 
The SPBD-155xxxxx transceivers provide with 

the LC receptacle that is compatible with the 
industry standard LC connector. The transceiver is 
also compatible with industry standard RFT 
connector and cage. It also includes a LOS (Loss 
Of Signal) circuit that provides a TTL logic-high 
output when an unusable optical signal level is 
detected. 

 
The module includes 1310nm un-cool FP laser, 

InGaAs PIN, Preamplifer and WDM filter in a 
high-integrated optical assembly for high-density 
system application. The SFP Bi-Directional 
transceiver can upgrade transmission capacity very 
convenient without installing new fibers. 

Application 

 

TTC TS-1000 

 

ITU-T G.985 

 

IEEE 802.3ah 100BASE-BX/ Fast Ethernet 

 

SONET OC-3/SDH STM-1 

 

FTTx WDM Broadband Access   

 

Switch to switch/backbone interface 

 

 

Performance 

 

SPBD-155E4J1RD data link up to 15km in 
9/125um single mode fiber. 

Summary of Contents for SPBD-155E4J1RD










Reviews: