Ethernet Communication Module IFD9506
DVP-PLC Operation Manual
55
Step 3: If you want to control the On/Off of Y0 (Y0 address: 0500) of the PLC at station address 0x0001
and On/Off of Y0 (Y0 address: 0500) of the PLC at station address 0x0003, select “Maintained”
button and create the button on the screen.
Step 4: Create two “Maintained” buttons.
(a) Click the
button on the left hand side
first. You will see the information of the button in the
“Property” window on the right hand side of the screen. Click “Write Address” to set up the
address of Y0 (0500) and the station address of the PLC (1). Select “Base Port” in “Link” field
and “RWB” in “Device Type” field.
(b) Next, set up the
button on the right hand side
in the same way as step (a) to modify the
station address of the PLC as “3”.
