background image

 

 

- 3 - 

KAD 340

s

afety

 

regulatIons

  •  The standards IEC/EN/DIN EN 50083 resp. IEC/EN/DIN EN 60728 must 

be observed.

 

•  Do not perform installation and service work during thunderstorms.

 

•  Assembly,  installation  and  servicing  should  be  carried  out  by  authorised 

electricians.

 

•  Switch off the operating voltage of the system before beginning with assem-

bly or service work.

 

•  Avoid short circuits! 

 

•  Observe the relevant country-specific standards, regulations and guidelines 

on the installation and operation of antenna systems. 

 

•  To ensure electromagnetic compatibility, make sure all connections are tight 

and the covers are screwed on securely.

 

•  No liability is accepted for damage caused by faulty connections or inap-

propriate handling of the device.

  Check the 

basis unit

 

KAB 3000

 a

ccording to the safety instructions listed in 

their assembly instruction.

  Take precautions to prevent static discharge when working on the device!

  Electronic devices should never be disposed of in the household rubbish. In 

accordance with directive 2002/96/EC of the European Parliament and the 
European Council from January 27, 2003 which addresses old electronic and 
electrical devices, such devices must be disposed of at a designated collection 
facility. At the end of its service life, please take your device to one of these 
public collection facilities for proper disposal.

g

eneral

 

InformatIon

2.1  s

cope

 

of

 

delIvery

 

1  Quad AV Adapting Unit KAD 340

 

1  AV cable

 

1  Brief Assembly Instructions

 

1  CD (assembly instructions)

Summary of Contents for KAD 340









Reviews: