EN
12
13
3/ Stop settings
3.2 Setting 2 automatic stops
It is possible that after the learning process the shutter will move in the opposite
direction to the button you press.
If that is the case, you can reverse the direction by pressing the following
sequence of buttons:
-
(at <1 second intervals) + (hold >3 seconds),
OR
-
(<1 second intervals) + (hold >3 seconds).
The motor will be activated once.
The mode will be automatically exited.
x 2
x 2
The shutter will not be locked when these stops are subsequently reached.
The motor will reverse its direction slightly so that there is no force on the
shutter.
The shutter will not be locked when these stops are subsequently reached.
The motor will reverse its direction slightly so that there is no force on the
shutter.
x 1
Upper physical
stop
Lower physical
stop
Stop on shutter
blade
Press and hold the
button briefly until the
shutter reaches the upper
stop.
The stop position will now be automatically set.
The motor will be activated once.
Press and hold the button until the shutter locks against the
lower stop.
The stop position will now be automatically set.
Press and hold the button until the shutter locks against the
lower stop.
The stop position will now be automatically set.
The motor will
be activated
twice
The motor will
be activated
twice
❶
Automatic upper stop
❷
Automatic lower stop
❸
Automatic lower stop
❸
The stops are set
❹
The stops are set
3.3 Setting 1 manual stop + 1 automatic stop
Press and hold the button until the shutter is in the required
position.
Upward slow mode (step by step) with the following
sequence of buttons:
O
O
(at <1 second intervals), then long press on
until
the shutter reaches the required position.
Press the following button sequence:
O
O
(at <1 second intervals), then long press on
.
The motor briefly starts once.
❶
Manual upper stop
❷
Setting the upper stop
x 2
x 1
