Delta Controls ASM-24 Installation & Application Manual Download Page 1

Access System Manager

Page 1 of 18

INSTALLATION & APPLICATION GUIDE

Access System Manager

ASM-24 (Rev 1.2)

Document Edition 1.1

P

RODUCT 

D

ESCRIPTION

The 

Access System Manager 

is a 

Native

 BACnet

Controller that communicates on a BACnet MS/TP or
Ethernet LAN using the BACnet protocol.

The 

Access System Manager

 is an intelligent

controller specifically designed for access control
applications. While this controller has no I/O it
provides access control capabilities through a network
of Door Modules which act as extended I/O to the

Access System Manager

.

T

ABLE OF 

C

ONTENTS

PRODUCT DESCRIPTION

.................................................................................................................................1

MODEL NUMBERS

............................................................................................................................................2

ACCESSORIES

....................................................................................................................................................2

PACKAGE CONTENTS

......................................................................................................................................2

REQUIRED TOOLS

.............................................................................................................................................2

OTHER RELEVANT DOCUMENTS

..................................................................................................................2

PRODUCT SPECIFICATIONS

...........................................................................................................................3

BOARD LAYOUT (ACCESS SYSTEM MANAGER)

.......................................................................................5

INDICATORS

......................................................................................................................................................6

JUMPER CONFIGURATION

..............................................................................................................................7

CONTROLLER ADDRESS DIP SWITCHES

.....................................................................................................8

MOUNTING

.........................................................................................................................................................8

POWER WIRING

.................................................................................................................................................8

NETWORK TOPOLOGY

..................................................................................................................................10

SERIAL (RS232) NETWORKS & CABLING REQUIREMENTS

...................................................................11

MODEM (RS232) NETWORKS & CABLING REQUIREMENTS

.................................................................12

ETHERNET NETWORKS & CABLING REQUIREMENTS

...........................................................................13

LINKNET AND MS/TP NETWORKS & CABLING REQUIREMENTS

........................................................15

COMMUNICATIONS SETUP

..........................................................................................................................16

CAUTIONS AND WARNINGS

........................................................................................................................16

COMPLIANCE DECLARATIONS

...................................................................................................................17

Summary of Contents for ASM-24



















Reviews: