Customer Service
Tel. (800) 377-3777
www.deltachildren.com
3. Assemble the rear axle as follows. Insert the
axle through each wheel, with axle going through
the brake cluster on the wheel first. Then slide
washer onto axle. (Fig. 4a) Secure the wheel with
the locking clip by pushing the straight side of pin
through axle hole. (Fig. 4b) Snap wheel cap into
place. (Fig 4c) Pull on each wheel to ensure that
each is securely locked onto the rear axle.
Front Wheel
Housing
Fig. 1
Fig. 1a
Fig. 3
2. Lean the stroller backwards so that it rests on
the handle and rear frame tubes and the front
wheel housing are pointing upward. (Fig. 1a)
• Push each front wheel posts into the front
wheel housing until snapped and locked into
place. (Fig. 2) Pull on the wheel to ensure that
it is securely attached to the stroller.
Quick release
button
Front wheel
locking device
Fig. 2
• To remove front wheels push the quick release
button located in the inner part of the front
wheel housing. (Fig. 3)
Hub Caps
Locking Clips
Washer
Fig. 4a
Locking Clips
Washer
Fig. 4b
Fig. 4c
1. Stroller is vertical and fully locked in the upright
position. (Fig. 1)
Summary of Contents for METRO PLUS 11388
Page 1: ...DCP 11 02 16 METRO PLUS 11388...
Page 14: ......