background image

8

Instructions For Changing Height of Seat

Instructions For Music Keyboard

Bee Button

On/Off 

Switch

Keyboards

Drum Button

• MUSIC FUNCTION FRONT TOY TRAY – Switch ‘on’ the music function by activating the ‘on/off’ switch.  select music by sliding the 3 POSITION SELECT 

MUSIC BUTTON “Bee” to the left and right as illustrated in FIG M.  POSITION 1 - plays Piano Sounds , POSITION 2- plays Animal Sounds,

   POSITION 3 - plays Melodies. 
•Press down keyboard and drum buttons to activate music.    
  

•ALWAYS REMOVE BABY FROM WALKER WHEN CHANGING FUNCTIONS
•ADJUSTING THE SEAT HEIGHT – To adjust the height, press leg button first located on each leg and either elevate or lower the leg to the desired position as 

illustrated in FIG N (4x). Remember to adjust one leg at a time and one position at a time per leg be sure they are in the same Height level before use.

•Once in a fully locked position, push downward on legs to ensure legs are in a locked position.
NOTE: The activity center can be adjusted to 3 different height levels. Make sure all legs are adjusted to the same height level when adjusting the height of the seat.  

1

2

3

2

1

www.DeltaChildrensProducts.com

Customer Care 

Tel. 1-(800)-377-3777 

Front Tray

Summary of Contents for Lil' Playstation II













Reviews: