STEP 3:
6
STEP 4:
U
D. 50mm BOLT x3
A. 75mm BOLT x1
C. CRESCENT
WASHER x4
INSERT THE BOTTOM BACK PANEL (PART X) AND
THE (2) MIDDLE FRONT RAILS INTO THE DIVIDER
FRAME. CAREFULLY ALIGN ALL OF THE DOWELS
WITH THE HOLES IN THE RIGHT SIDE (PART M).
ATTACHED THE RIGHT SIDE USING (4) 50mm
BOLTS (PART D) AND (4) CRESCENT WASHER
(PART C) FOLLOWING THE DIRECTION ON PAGE
4. TIGHTEN ALL BOLTS WITH THE ALLEN
WRENCH.
D,
C
D,
C
D,
C
M
X
D. 50mm BOLT x4
D
D
A
V
INSERT THE DIVIDER FRAME (PART V) INTO THE
(2) MIDDLE FRONT RAILS AND BOTTOM BACK
PANEL. CAREFULLY ALIGN ALL OF THE DOWELS
WITH THE HOLES IN THE DIVIDER FRAME. USING
(3) 50mm BOLTS (PART D) FOR FRONT, BACK TOP
RAIL AND FRONT BOTTOM RAIL. USING (1) 75mm
BOLT (PART A) FOR BACK BOTTOM RAIL.
TIGHTEN ALL BOLTS WITH THE ALLEN WRENCH.
