6
Customer Service [email protected]
www.DeltaChildren.com
TO
P
TO
P
1
2
3
INSTALLING TOP & BOTTOM SUPPORT TUBES
• To install: Align top & bottom support tubes with side frame as shown,
insert into corresponding holes and secure to side frame with hex key
and M6 (27 MM) hex screw (Fig. 1).
• Note: When installing top support tubes, make sure the notches are
facing the outside of bassinet (Fig. 1A).
ATTACHING STORAGE BASKET & FABRIC LINER
• To install bassinet fabric: Lay side frame flat on floor with support tubes
secured on one side. Align the fabrics with the side frame as shown
and slide down support tubes (Fig. 2).
• Make sure to allow the notches to show through the slits in the fabric so
that they are visible on the outside of Top Bassinet Tube (Fig. 2A).
ATTACHING WOODEN CROSS BEAMS TO SIDE FRAME
• To attach wooden cross beams: Align with side frame as shown and
insert into corresponding holes (Fig. 3).
ASSEMBLY
Fig. 2
Fig. 2A
Notch
Fig. 3
*Assembled
Fig. 1
Fig. 1A
4
ATTACHING REMAINING SIDE FRAME
• To complete bassinet construction: Take remaining side frame and
align with support tubes and wooden support beams as shown.
• Secure with hex key and M6 (27 MM) hex screw (Fig. 4).
Fig. 4
TO
P
TO
P
TO
P
TO
P
M6 (27 MM) Hex Screw (X8)
*Screw is actual size to scale
M6 (27 MM) Hex Screw (X8)
*Screw is actual size to scale
Notch
