background image

2

Customer Service Tel. (646) 435-8726 

www.DeltaChildren.com

Consumer Information

WARNING 

• 

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised     

   by your physician.

SUFFOCATION HAZARD

Infants have suffocated:

• 

In gaps between an extra padding, a mattress (too small or too thick) and    

  product sides.

• 

On soft bedding.

• 

NEVER add a pillow, comforter or another mattress for padding.

• 

Use only the pad provided by the manufacturer that is no thicker than 25 mm 

  (1 In) and is of such a size that, when pushed against any side of the product,  

  it does not leave a gap of more than 25 mm (1 in) between the mattress 

  and sides. 

FALL HAZARD: 

To help prevent falls, DO NOT use this product when the infant begins to push up on hands and knees or 

has reached manufacturer’s recommended maximum weight of 13.6kg (30lbs), whichever comes first.

WARNING: 

Do not use this bassinet if you cannot exactly follow the accompanying instructions. Failure to follow these 

warnings and instructions could result in serious injury or death. 

• Read all instructions before assembling unit. 

KEEP INSTRUCTIONS FOR FUTURE USE.

DO NOT USE THIS UNIT IF THE INSTRUCTIONS CANNOT BE STRICTLY FOLLOWED.

• 

Before each usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or sharp edges. NEVER use this  

  product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and 
  periodically during use. Contact Simmons Customer Service Department at 1-646-435-8726 for 
   replacement parts, repair or instructions.

• 

Do not leave child unattended in the bassinet when it is in the “rocking/gliding” mode. Always make sure the wheels or stands are           

  in the locked “down” position. Remove any tools or excess parts including plastic packaging from bassinet vicinity after assembly. 

STRANGULATION HAZARD: 

Children have STRANGLED in cords. Keep the cord out of reach of children. 

• 

Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords. 

   DO NOT suspend strings over a product or attach strings to toys.

• 

Always attach all provided fasteners tightly according to the instructions. Check frequently. Do not use if there are any loose or  

  missing parts or signs of damage. Do not substitute parts. Contact the manufacturer for replacement parts. 

• 

Use bassinet with only one child at a time.

• 

Toys are not to be “mouthed” by the baby and should be positioned clearly out of reach of the baby’s face and mouth. 

• 

Do not place medication, small toys, small items, cords, straps or similar items that could become wound around the child’s neck  

  in or near this product and do not place product near a window, patio door, heater, or power outlet. 

 If a sheet is used with the pad, use only the one provided by Delta Children or one specifically designed to fit the dimension of the   

   bassinet mattress. 

Summary of Contents for Serta iComfort 701605 Series





















Reviews: