13
Customer Service
Tel. (646) 435-8726
www.DeltaChildren.com
Attaching Evenflo Car Seats
®
Evenflo Nurture™ and Embrace™
®
Attaching Evenflo Car Seats - Evenflo® Nurture™ and Embrace™
-
Lock the rear wheels (Fig. 14). Remove seat (Fig. 14A). Press both buttons
located on the front side of the adapter and rotate into a downward position
(Fig. 14B). Attach the car seat adapter to the stroller frame (Fig. 14C) until it
clicks into a fully locked position (Fig.14D). Place car seat into car seat adapter
until it “CLICKS” into a fully locked position. Evenflo car seats “CLICK” and
lock on the back of the adapter when in a fully locked position (Fig. 14E). Make
sure car seat is fully fastened by pulling upward.
®
14
Evenflo Car Seat
Fully Locked Position
Securing Car Seat With Velcro Straps-
Final step to secure the footrest side of car seat onto stroller, use the straps
with velcro to secure seat onto stroller. (Fig. 14F). Check that car seat is
securely attached by pulling up on the car seat. To remove, undo latches and
unlock car seat from adapter.
Removing Car Seat -
To remove, squeeze release handle at back of infant
restraint and lift upward out of adapter.
Fig. 14B
Car Seat Adapter -
Correct Placement
Car Seat Adapter Clicks And Locks
On Both Sides Of The Stroller Frame
When In A Fully Locked Position
Front
Back
Fig. 14C
Fig. 14D
Attaching Car Seat Adapter:
Evenflo Locking Latch
Locks Under Center
Of Adapter When In A
Fully Locked Position
Fig. 14E
Fig. 14F
Insert On
Both Sides
Press Both Side
Buttons And Lift
To Fully Remove
Seat
Fig. 14A
Fig. 14
Push downward on brake
lever to lock stroller
Lock The Rear Wheels:
Remove Seat:
Summary of Contents for Jeep SPORT UTILITY
Page 17: ...17 646 435 8726...
