Digital Projection
Titan Laser Series
Rev B January 2019
Page 23
Important Information
Connecting the power supply
Rest of the world:
Firmly push the mains connector into the
socket
.
USA only:
Firmly push the mains connector into the
socket
.
Rotate the connector 90° clockwise to lock it in place
Use only the power cable provided.
Ensure that the power outlet includes a ground connection as this equipment MUST be
earthed.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged power
cable.
The USA model can operate at 110V or 200V. Voltage selection is automatic, but the
projector must be powered off before switching power outlets.
Light output power is reduced to approx 30% when using the USA model and operating on
110V.
1
2
2
1
