Digital Projection E-Vision 4000 Series
Using the projector
Analog
Input
Picture
Alignment Network
Settings
Info
Analog
H Position
0
V Position
0
Phase
46
Clock
0
Menu = Exit
Menu Select ◄ ►
Scroll ▲ ▼
l
Horizontal Position, Vertical Position
Adjusts the horizontal and vertical display position.
l
Phase
Adjusts the phase of the pixel sampling clock relative to the incoming
signal. Adjust the phase if noise is visible.
l
Clock
Adjusts the frequency of the pixel sampling clock. Flicker or vertical banding
indicate poor tracking.
3D
You must connect an Infrared
emitter when using 3D IR (utilizing
Active 3D Glasses) , alternatively a
ZScreen system (utilizing Passive
Polarized 3D glasses) can be used.
If
3D
is set to
Off
, all other 3D
settings will be unavailable.
See 3D connections on page 37 for
more information about supported
3D formats.
See 3D formats on page 70 for 3D
resolutions and frame rates.
Input
Picture Alignment Network
Settings
Info
3D
3D
DLP-Link
3D Sync Invert
Off
Menu = Exit
Menu Select ◄ ►
Scroll ▲ ▼
l
3D
Choose
DLP-Link
when using 3D shutter glasses. Choose
IR
when using
infrared 3D glasses.
l
3D Sync Invert
Choose
On
to swap the left- and right-eye images, if they are displayed in
the wrong order.
Rev A December 2021
page 48
Operating Guide
Notes
