Using the projector
Digital Projection E-Vision 4000 Series
Picture
HDR
picture mode is automatically
selected when the projector
detects an input with a HDR10
signal format.
The visible image may blank for a
short period when cycling through
the Picture Modes.
Input
Picture
Alignment Network
Settings
Info
Picture Mode
Presentation
Advanced
Color Manager
Contrast
51
Brightness
48
Sharpness
15
Audio
Picture Mode Reset
Menu = Exit
Menu Select ◄ ►
Scroll ▲ ▼
l
Picture Mode
Choose from
Bright
,
Presentation
,
Game
,
Movie
,
sRGB
,
DICOM
, and
User
.
Use a different setting depending the type of input source.
l
Advanced, Color Manager
Access the submenu to edit the settings.
l
Brightness, Contrast, Sharpness, Audio
Adjust the levels as required.
l
Picture Mode Reset
Resets the picture settings to default values
Advanced
Input
Picture
Alignment Network Settings
Info
Advanced
Gamma
1.8
Color Temperature
Normal
Dynamic Black
Off
White Balance
Enhancement
Menu = Exit
Menu Select ◄ ►
Scroll ▲ ▼
l
Gamma
Choose a de-gamma curve from
1.8, 2.0, 2.2, 2.4, B&W, Linear
Used correctly, the
Gamma
setting can improve contrast while maintaining
good details for blacks and whites.
If excess ambient light washes out the image and it is difficult to see details
in dark areas, lower the
Gamma
setting to compensate. This improves
contrast while maintaining good details for blacks. Conversely, if the image
is washed out and unnatural, with excessive detail in black areas, increase
the setting.
l
Color Temperature
Choose from
Warm
,
Normal
,
Cold
l
Dynamic Black
Set to On to allow for increased contrast in darker scenes by modulating the
light source.
l
White Balance, Enhancement
Access the submenu to edit the settings.
Operating Guide
Rev A December 2021
page 49
Notes
