5
PORTABLE LP CONNECTION
–
DELSOL
G
AS
G
RILL
NOTE: USE ONLY A 20-LBS. (5-GALLON
CAPACITY) GAS CYLINDER.
WARNING: DO NOT PLACE MORE THAN
ONE
CYLINDER IN THE BASE CABINET ENCLOSURE
AT ANY TIME.
WARNING: DO NOT USE A DENTED OR RUSTED
LP CYLINDER.
NEVER USE A CYLINDER WITH A DAMAGED
VALVE.
ALWAYS CHECK FOR LEAKS AFTER
CHANGING THE LP CYLINDER. (Page 8)
THE HIGH PRESSURE LP REGULATOR AND
HOSE (SOLD SEPARATELY) MUST BE USED
WITHOUT ALTERATION.
ALWAYS USE THE TANK SECURING DEVICE
SUPPLIED WITH GRILL BASE AND ENSURE
THAT THE TANK IS SECURED PROPERLY.
DELSOL grill for use of LP gas comes equipped with its
own regulator, which
MUST NOT
be removed.
1)
To install the gas cylinder, place the cylinder onto the
provided cutout.
2)
Secure the cylinder with the chain provided. Ensure
that cylinder is firmly secured.
3)
Check to ensure that the tank’s gas valve on top of the
cylinder is closed.
4)
Connect the
3
/
8
” flare end of the hose to the grill
coupling using a ¾” open wrench. Do not apply pipe
sealant to the
3
/
8
” flare connection.
5)
Connect the LP regulator to the cylinder and hand-
tighten only. Open the tank valve and make sure all
connections are leak tight using a soapy water solution
and a brush. (Reference page 8 for leak test
procedure).
Convertible Gas
Pressure Regulator
3/8 flare fitting
