background image

 

LDB-1 User Manual

 

10 

Play Songs Mode 

A song is a sequence of patterns.   There are 16 songs, organized into two banks of eight songs.  Each 
song can be up to 24 patterns long. 

Unlike pattern chains, a song can contain patterns from multiple pattern banks, and can repeat patterns.  
For example, a song could play pattern 1 twice, then pattern 2, then pattern 1 twice, then pattern  48, 
etc.  This is explained in more detail in the description of the Edit Song mode. 

 Sel 

  

Songs:

 Pressing one of the eight Selector buttons selects the song to play within the current song 

bank.  The LED corresponding to the currently playing song is illuminated.  If a song is playing when a 
different  song is selected, the  new song will not  start  playing until the  current measure  finishes.  The 
LED corresponding to the new song will blink letting you know that it will play next. 

 Run   Start / Stop:

 The run button starts or stops playing the selected song.  While running, the select-

ed song will repeat continuously.  A song can be selected while not running and that song will play when 
the Run button is pressed. 

 Ctrl   Select Song Bank:

 When you press and hold the Ctrl button, Selector LED 1 or LED 2 will be illumi-

nated,  indicating  the  current  song  bank.    To  leave  the  bank  unchanged,  release  the  Ctrl  button.    To 
change the bank, hold down the Ctrl button while pressing Selector button 1 or 2. 

 Alt   Songs / Fills:

 Pressing the Alt button toggles between Songs and Fills behaviors.  

Songs

 behavior is 

as described above.   

Fills

 behavior allows you to play a pattern in the middle of a song, which is called a fill.  When the Fills 

behavior is activated, pressing a Selector button will select a fill pattern.  After the currently playing song 
measure finishes, the fill pattern will be played, then the song will continue with the next pattern. 

A fill pattern can also be selected when the song is stopped.  When the Run button is pressed, the fill 
pattern will be played one time, and then the song will begin.  This is called an intro pattern. 

The Alt LED will be illuminated when the Fills behavior is selected. 

When the Fills behavior is active, The Ctrl button is used to select the pattern bank, as opposed to the 
song bank. 

 

 

 

Summary of Contents for LDB-1 Little Drummer Boy

























Reviews: