GARMIN NAVI SYSTEM SHOW in our unit
IGO System Show
Original
Original
Original
Original button
button
button
button controlling:
controlling:
controlling:
controlling:
If you want to use the car original button to operate vido interface switching function, you should wield
the white cable (on the power connector) to the original monitor PCB, the point on the original monitor
PCB is the switching point:
Press MEDIA: RGB—AV1—AV2
The white cable in power connector
-----Original Radio—RGB -----
------Switching cable
1. Black: Ground
If you do not weld the white switching cable
2. Green: to rear Light power cable:=12V
for original button switch, please use this
3. White: Switching cable to original Switching Point weld
toggle switcher press: RGB—AV1—AV2
4. RED: +12V power.
---original----RGB----
