Operation Manual Delphi NAV2
0
0
11
Section 3 Installing Delphi NAV2
0
0 in Your Vehicle
Warning:
To avoid personal injury, follow the safety guidelines and installation
instructions provided so that the Delphi NAV2
0
0 does not obstruct the view of the
driver, interfere with the operation of any airbags and safety features in the vehicle,
or become airborne in the case of an accident. Do not attempt to install Delphi
NAV2
0
0 while driving.
Before installing the Delphi NAV2
0
0, check whether your vehicle is fitted with a
heat-reflecting or heated windshield. If so, you will need to purchase an external
antenna from your retailer to allow your unit to pick up the GPS signals.
Note:
Alternative-mounting options may be available for your vehicle make and
model. Contact your retailer or Delphi for more information.
Note:
Some countries prohibit the mounting of any electronic device in any location
on the vehicle dashboard. Be sure to check the local laws for applicable mounting
before installing the car mount.
Note:
In the state of California and Minnesota, it is necessary to use the dashboard
mount, according to state law.
To mount the suction mount to the windshield, follow these steps:
1.
Flip up the GPS Antenna
2.
Using the two tabs on the bottom of the
cradle, locate the Delphi NAV2
0
0 and
rotate rearward. While pushing in the two
grey release buttons, continue rotation
until unit is firmly seated in the cradle
3.
Release the two grey buttons. Reverse
operation for unit removal.
4.
Position suction cup firmly against
windshield at desired location.
5.
Flip the lever towards suction cup. Unit is
now secure for operation.
