DèLonghi SLF 605, User & Installation Instructions Manual

Page: 25 / 36

25
FASTENING THE COOKTOP
Each cooktop is provided with an installation kit including brackets and screws for fastening
the cooktop to benches from 30 to 40mm thick.
The kit includes two “
F ” type brackets (for the front of the cooktop), two “ R ” type brackets
(for the rear of the cooktop) and four self-threading screws “
S
”.
• Cut the unit according to the dimensions in fig. 4.1a.
• Stretch gasket “ G ” over the edge of the hole made, being careful to overlay the junction
edges.
–
Fasten the brackets “ F ” and “ R ” to the appropriate socket holes, without tightening the
screws “ S ” for the moment. Make sure that the tabs are mounted correctly, as shown
(figs. 4.2b, 4.2c). Rotate the tabs so that
the cooktop can be put into the cutout.
–
Put the cooktop into the cutout and
position it correctly.
–
Put the brackets “ F ” and “ R ” into place;
tooth “ A ” of the brackets should go into
the hole (figs. 4.2b, 4.2c).
–
Tighten screws “
S
” until the cooktop is
completely secured to the bench.
–
Using a sharp cutter or trimmer knife,
trim the excess sealing material around
the edge of the cooktop.
Take care not to damage the workbench.
30
mm min.
40
mm max.
S
A
F
G
30
mm min.
40
mm max.
40
mm min.
40
mm min.
S
A
R
G
30
mm min.
40
mm max.
S
A
F
G
30
mm min.
40
mm max.
40
mm min.
40
mm min.
S
A
R
G
F
F
F
F
R
R
R
F
F
R
R
Fig. 4.2b Fig. 4.2c
Fig. 4.2a
Rear Fixing Brackets Front Fixing Brackets