23
PREPARING FOR USE
The instructions below will enable you to prepare your air condi-
tioner for operation as efficiently as possible.
Before use, make sure the air intake and outlet grilles are unob-
structed.
A
IR-CONDITIONING WITHOUT INSTALLATION
Just a few simple steps and your comfort is ensured with your
appliance:
• Fit the air exhaust hose in the housing at the back of the
appliance (fig. 1).
• Fit the window outlet to the end of the hose.
• Place the air conditioner near a window or French window.
•
Adjust the length of the hose to reach the window.
• Make sure the air exhaust hose is unobstructed.
• Open the window or French window slightly and position the
outlet (fig. 2).
• If you have a double window, use the sucker provided to hold
the two parts of the window together (fig. 3).
You can also use the "
adjustable bar
" (T) accessory.
-
Fit the window outlet in the housing in the bar (fig. 4)
-
Position the bar on the window sill and adjust until it fits in
the guides of the blind (the length can be blocked with
the plastic pin provided), then lower the blind (fig. 5).
-
Fit the air exhaust hose to the end of the window outlet
(see fig. 6).
-
Place the air conditioner near a window or French window
and connect the end of the hose.
Keep the air hose as short and free of curves as possible to avoid
bottlenecks.
1
2
1
2
1
2
3
4
5
1
2
1
2
6
