24
the plate for 3 minutes.
The countdown till the end of preheating is displayed.
Please note:
the turntable preheating time cannot
be changed.
• At the end of preheating, the appliance emits 2 beeps.
Remove the grill/pizza plate (D) from the oven using oven
mitts (take care, it is very hot!) (fig. 14) and place the food
to be cooked/heated on the plate.
• Put the grill/pizza plate (D) back in the oven and press the
START button (5) (fig. 5) again (if the button is not pressed
within 1 minute, cooking will resume automatically). The
set time appears on the display.
Please note:
you can also change the time set du-
ring cooking by just pressing the STOP button (7) (fig. 9)
once or opening the oven door to briefly pause cooking.
• The end of cooking is indicated by 3 beeps and “End” is di-
splayed (fig. 14). Open the door and remove the food.
The time of day is displayed when the STOP button (7) (fig.
9) is pressed or 3 minutes after cooking has ended.
Danger of burns!
while cooking/heating the food,
the oven functions in Combi with Grill mode. Take great
care when taking the food out of the oven as both the grill/
pizza plate (D) and the element (A) at the top of the oven
become very hot.
Below are some tips for getting the best from this function and
obtaining optimum results:
Food
Notes
Frozen pizza
Frozen cordon bleu
Frozen fish fingers
Frozen uncooked
croissants
• Place the pizza on the plate and
cook for 18-20 minutes.
• Place the cordon bleu on the plate
and cook for 9-11 minutes. Do not
turn during cooking.
• Place the fish fingers on the plate
and cook for 8-10 minutes. Do not
turn during cooking.
• Place the croissants on the plate
and cook for 6 minutes.
“BREAKFAST” FUNCTION
The breakfast function can be used to quickly and easily heat
the classic breakfast components - a cup of coffee/milk/tea and
fresh (not frozen) croissants/brioches or slices of bread to be to-
asted. During the first phase, the contents of the cup are heated.
Thanks to the high temperature reached, your drink stays warm
for a long time.
In the second phase, the food is heated by the traditional grill
elements. This makes the surface of the brioches crispy and to-
asts the bread.
Proceed as follows:
• Press the
button (4) (fig. 15).
The icon lights up and “1” is displayed (fig. 16).
You can heat the quantities needed for a single breakfast
(e.g. one cup of milk and one croissant).
If you want larger quantities, press the
button (4)
(fig. 15) again to choose the second programme (“2” is di-
splayed) (fig. 17).
• Rest the cup containing the drink in the oven on the turn-
table (G) (fig. 18).
Press the START button (5) (fig. 5) to begin cooking.
A countdown of the time left to the end of cooking is di-
splayed.
• At the end of the first phase, the oven stops automatically
and emits two short beeps. The cooking time for the se-
cond phase flashes. Open the door and remove the cup.
Now place the croissants or slices of bread directly on the
turntable (G). We recommend using the wire rack (F) (fig.
19).
• Start the “Breakfast” function by pressing the START button
(5) (fig. 5) again. If you do not restart the oven within 1
minute by pressing the START button, cooking will resume
automatically.
• At the end of the second phase, the oven stops definitively
and “End” is displayed (fig. 12).
• Open the door and remove the food.
The time of day is displayed when the STOP button (7) (fig.
9) is pressed or 3 minutes after cooking has ended.
Danger of burns!
while cooking/heating during
the second phase, the oven operates in Grill and/or Fan
mode. Take great care when taking the food out of the
oven as both the element at the top and the inside walls
become very hot.
Programming with the
Breakfast” button
You can also use the
button (4) to programme any other
type of two-phase cooking you want.
The two cooking processes will be performed in sequence and
the oven will pause for 1 minute between the two phases to give
you time to check cooking progress. The new programme will
take the place of the default Breakfast function.
Proceed as follows:
• Press and hold the
button (4) (fig. 15) for at least
3 seconds. The appliance emits a short beep and “Fct1”
flashes on the display (fig. 20).
• Set the first function with the FUNCTION button (2) (fig. 1)
