5
Do not fill with less than 0,3 litre of water
to prevent
the kettle running dry while operating; misuse of this kind
will shorten the life of the element.
Do not fill with more than 1.7 litres of water
(up to
the MAX level).
If the kettle is overfilled, there is a risk that boiling
water may be ejected causing burns.
Switching on and operation
- Plug into the mains. All of the buttons will light up for a few
seconds and a beep will sound.
- Set the kettle on the electric base.
- Press the button
to turn the kettle on.
- The appliance lets you select from the following
temperatures: 75°C, 80°C, 85°C, 90°C, 100°C in order
to choose the most suitable one see “Recommended
temperatures table”.
- Select the desired temperature by pressing 75, 80, 85, 90
or 100. The button selected will light up and the kettle will
start operating. The button for the temperature selected
will start to flash slowly.
- The set temperature can be changed during operation
(A lower temperature cannot be chosen if the water
temperature is higher than the one selected).
- The kettle shuts off automatically and beeps 3 times
when the water has reached the desired temperature. The
temperature button selected will stay on.
- Kettle operation can be shut off or interrupted at any time
by pressing the on button
or removing the kettle from
the base.
Please note:
if the kettle is lifted before the selected
temperature has been reached, once it is put back on the
base it will restart automatically. The last selection made
will remain in the memory for about 5 minutes.
RECOMMENDED TEMPERATURES TABLE
Temperature setting
Recommended for
75°C
Green tea
80°C
Jasmine tea
85°C
Oolong tea
90°C
Instant coffee
100°C
Instant beverages that call
for boiling water
Please note:
for a more accurate temperature
adjustment, we recommend filling the kettle with at least
1 litre of water (4 cups).
KEEP WARM FUNCTION
- Press the button
once and select the temperature from
75°C and 90°C. Press the keep warm button (the button
will light up). The kettle will start operating.
Please note:
the keep warm function cannot be activated
if 100°C is selected.
- As soon as the water has reached the desired temperature,
the Keep Warm function will automatically activate to
keep the water at the desired temperature. The button
remains lit during the keep warm period (about 20
minutes) and shuts off automatically.
- To interrupt this function at any time, just press the button
once and the light will shut off. The kettle will continue
to operate without the Keep Warm function.
Pouring
-
Remove the kettle from the power base and carefully pour
out the water. Do not tilt the kettle suddenly or pour water
out at too sharp an angle.
-
When you lift the kettle from the base, you may see
moisture on the top surface of the base. Condensation on
the base is perfectly normal, and should not be a cause for
alarm.
MAINTENANCE
Cleaning the kettle
- Allow the kettle to cool down fully and disconnect the
appliance from the mains before cleaning.
- Do not immerse the kettle or base in water.
- Use a soft dampened cloth to wipe the outside of the kettle
and dry with a soft, dry cloth.
- DO NOT use metal polish or harsh scouring agents.
- Ensure that all connectors and sockets are kept dry.
Important!
Avoid accidentally spilling water on the
buttons. If this occurs, unplug the base from the mains and
thoroughly dry the buttons before switching the kettle back on.
Scale
Scale is mainly calcium carbonate (chalk), a harmless, naturally
occurring mineral found in most water supplies. “Hard” water
contains more of this mineral than “soft” water. When the water
is heated, the minerals in the water solidify, making the water
