DeLonghi TRD50615E, Instructions For Use Manual

Page: 10 / 22

10
Example of display:
❶
❸
❷
❹
Power level setting in timer operation mode
In timer operation mode, the unit works by default at max
power level.
It is possible to change the power level as follows:
1. With power ON, press timer button once then press the
control dial and the power level icon will blink.
2. Turn the dial to choose between min / med / max /
max+eco
.
3. Press the dial to confirm.
Example of display:
min med max max + eco
❶
❸
❷
Please note: If a procedure to modify or monitor the
unit settings is interrupted and no button is pressed for two
minutes, the settings shown on the display will not be main-
tained and the appliance will go back to the settings previ-
ously displayed.
EXTRA FUNCTIONS
Key/child lock
To prevent accidental button activation, it is possible to lock
the keys. To activate this function in either STANDBY or ON
mode, press the timer button and the control dial together
for at least 4 seconds. The display shows the symbol and a
beeping noise will be emitted.
When the appliance is ON and the key lock is activated:
- buttons and dial are blocked
- pressing the POWER ON/STANDBY button 1 time: the
unit is in standby, and the appliance remains in STAND-
BY even if the POWER ON/STANDBY button is pressed
again.
- to turn the appliance on again it will be necessary to
unlock the key lock.
When the appliance is OFF and the key lock is activated:
- all buttons and dial are blocked
- it’s not possible turn on the appliance
To deactivate the function, press the timer button and control
dial together for at least 4 seconds.
Display brightness regulation
After a few seconds of inactivity the display brightness is au-
tomatically reduced.
The brightness level during inactivity can be adjusted to the
desired level choosing from 3 levels available.
When the appliance is in STANDBY press and hold the con-
trol dial for about 5 seconds, the current level of brightness
appears.
Turn the dial till the desired brightness is reached, then press
the dial to confirm.
Buzzer sound on/off
When the appliance is in STANDBY press the control dial for
about 5 seconds, the current level of brightness appears:
press the timer button and turn the dial to modify the status
of the buzzer from ON (
l
green) to OFF (
l
red
)
and vice
versa.
Press the dial to confirm.