DeLonghi PrimaDonna Elite ECAM 650.75.MS, Instructions For Use Manual

Page: 24 / 31

24
19.3 Removing the ilter
Replace the ilter (C4) when “REPLACE WATER SOFTENER FILTER,
PRESS OK TO START
” appears on the display (B). To re-
place the ilter immediately, press “ OK” and follow the in-
structions from point 3.
To replace the ilter later, press “
ESC”. The symbol
appears on the display to remind you that the ilter needs
replacing.
To use the appliance without the ilter, proceed as follows:
1. Extract the tank (A16) and exhausted ilter;
2. Press
“
”
(B2) to enter the menu;
3. Press <(B10) or > (B8) until “ WATER FILTER” appears on
the display;
4. Press “ “;
5. “ REMOVE FILTER” appears on the display;
6. Press
“ ” ;
7. “ CONFIRM REMOVE FILTER”: press “ OK” (or
press “ ESC” to go back to the settings menu);
8. “ REMOVE FILTER COMPLETED”: the change has
been saved. Press “ OK” to go back to the homepage.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the ilter even if
the message has not yet been displayed.
20. TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10 A
Power: 1450 W
Pressure: 1,5 MPa (15 bar)
Water tank capacity: 2 l
Size LxDxH: 260x480x375 mm
Cord length: 1750 mm
Weight: 12,4 kg
Beans container capacity: 400 g
The appliance complies with the following EC
directives:
• European Standby Regulation 1275/2008
• Materials and accessories coming into contact with food
conform to EEC regulation 1935/2004.
21. DISPOSAL
The appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
22. DISPLAYED MESSAGES
DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION
FILL TANK WITH FRESH
WATER Insuicient water in the tank (A16). Fill the tank with water and/or insert it cor-
rectly, pushing it as far as it will go until it
clicks into place.
INSERT WATER TANK The tank (A16) is not correctly in place. Insert the tank correctly and press as far as it
will go.