4
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location. Your heater
will minimize the effect of cold drafts.
The heater must not be located immediately below a socket-outlet.
2. CONNECTION
The heater must be connected to a properly polarized A/C 110/120 V household outlet in
perfect working conditions.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet
where the heater plug is fitted in.
3. SWITCHING ON THE APPLIANCE (FIG. 1)
•
Turn the thermostat knob in a clockwise
direction until it reaches the maximum
setting.
•
Heating at full power: press both the foot
switches (min +
med). The lights will come o
n
.
•
Heating at medium power: press only the
foot switch "med". Only the light "med" will
come on.
•
Heating at minium power: press only the
foot switch "min". Only the light "min" will
come on.
4. SETTING THE THERMOSTAT
When the room has reached the required
temperature, turn slowly the thermostat knob
counter-clockwise until the lights go out but no further.
Having been set in this way, the temperature will automatically be regulated and kept at a
constant level by the thermostat.
5. ANTIFREEZE FUNCTION
Set the switch to "on" and then turn the thermostat knob to " " setting. When it is set in this
way the appliance keeps the room at a temperature of approx. 42
°
F (5
°
C) with minimal energy
expenditure.
6. MAINTENANCE
•
Before cleaning, turn off heater, unplug from outlet and allow heater to cool.
•
DO NOT immerse cord, plug or heater in water or other liquid or pour water or other liquid
over heater (see IMPORTANT SAFEGUARD).
•
To clean dust and lint from air openings, disconnect the heater electric cord from the wall
outlet. Use the crevice tool hose attachment of a household vacuum cleaner to remove dust
and lint from air openings.
To clean, pass the vacuum cleaner attachment along the grill surface. Dust the appliance
with a soft, dry cloth. Never use abrasive powders or solvents. Should the appliance fail to work
properly do not attempt to carry out repairs as there may be a risk of fire or electric shocks.
Always contact the nearest authorized Service Center (see attached list of Service Centers).
HOW TO USE YOUR HEATER
foot switches
FIG. 1