22
Pre p a r i n g f o r u s e
AIR-CONDITIONING WITH INSTALLATION
If required, the Pinguino can also be installed
semi-permanently (Fig.
D
).
•
Fit the flange accessory
provided in
the hole
•
Fit the hose
in the housing at the back
of the appliance (fig.
A
page 21).
•
Fit the end of the hose
to the flange
as shown in fig.
F
.
10
11
11
10
Proceed as follows:
•
Drill a hole in an outside wall or through a
window pane.
Respect the height and dimensions of the
hole given in figure
E
.
30 cm
30 cm
106
MAX100 cm
MIN 35 c
When the hose
is not fitted, the hole can
be closed with the flange cap
.
NOTE.
When installing the air conditioning unit semi-
permanently, you should leave a door slightly
open (as little as 1 cm) to guarantee correct
ventilation.
10
11
in the window
pane
in the wall: you are
recommended to
insulate the sec-
tion of wall using
suitable insulation.
in the woo-
den kick-
board of a
French win-
dow
E
F
Keep the air hoses as short and free of
curves as possible to avoid constrictions.
D
