background image

23

ENGLISH

O p e r a t i o n

DEHUMIDIFYING MODE

Ideal for reducing the humidity in a room without lowering or rai-
sing the temperature (spring or autumn, damp rooms, rainy spel-
ls, etc).
Place the appliance in the room without fitting the air exhaust
hose  

.

After selecting the dehumidifying mode, the indicator light (

N

)

comes on. Press the“

+

” (

G

) or “

-

” (

O

) buttons until the required

humidity is displayed.
At the same time, the auto fan indicator light (

P

) comes on as the

appliance automatically selects the most appropriate speed.
Water is removed from the air and collected in the tank 

at

the back of the air conditioning unit.
When full, the appliance shuts down and “      ”(full tank) appears
on the display.  The tank must be extracted and emptied (fig.  

H

).

When the tank has been emptied, the appliance starts up again.

NB: 

remove the air exhaust hose

if it gets in the way.

The accessory 

enables the condensate produced to be eli-

minated 

without requiring the tank to be emptied periodically.

The accessory is fitted into the rapid coupling 

as shown in fig. 

I.

NB: 

in order for continuous drain to function, make sure the

accessory is connected correctly to the coupling. To release,
press the coupling flange.

FAN MODE (AIR PURIFYING T100ECO ONLY)

Adjust fan speed by pressing the "

FAN

" button (

T

) as described for

the air-conditioning mode.
Remember that the higher the speed, the more air is filtered.  If
you select "Silent" speed, less air is filtered but the appliance is
also less noisy.
In this mode, "

AUTO

" cannot be selected. The fan speed selected

will be displayed.

"3M Filtrete" air purifying filter (T100 eco only)

Ideal for dusty or polluted environments.  The T100ECO model cir-
culates and purifies the air with the help of 3M Filtrete™ electro-
static dust filters.
In addition to removing dust, the air purifying filter also captures
the smallest impurities (down to 0.003 mm), such as cigarette
smoke.
To use the air purifying filter:
A) Remove the intake grille 

.

B) Remove the filter from the packaging.
C) Use the two plastic edges to attach the filter to the hooks on

the dust filter inside the intake grille.

D) Replace the grille on the appliance.

7

9

16

17

8

12

H

I

50

GB-5751012500  14-04-2004  15:59  Pagina 23

Summary of Contents for PACT 90ECO














Reviews: