background image

4

Important safeguards

Use this appliance only as described in this instruction manual.
As with any electrical appliance, the instructions aim to cover as many situations  as possible.
Caution and common sense should be used when operating and installing this air conditioner.

This appliance has been manufactured to cool and dehumidify domestic environments and
must not be used for other purposes.

It is dangerous to alter or modify the unit's characteristics in any way.

The appliance must be installed in accordance with the relevant national legislation.

Should repairs be necessary, contact the nearest authorized Repair Service Center. Unautho-
rized servicing can be dangerous.

The appliance is not intended for use by persons (including children) with reduced physical, sen-
sory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.

In the case that the power cord becomes damaged, this must be repaired only by specialized per-
sonnel authorized by the manufacturer in order  to protect against fire.

Always ensure the appliance is plugged into a grounded 3-prong outlet. If you have any doubts
check with a qualified electrician.

We strongly discourage the use of an extension cord due to  potential safety hazards. 

Before cleaning or maintenance operations, always unplug the unit from the outlet.

Do not pull on or place strain on the power cord when moving the appliance.

The appliance should not be installed where the atmosphere may contain combustible gases,
oil or sulphur, or near heat sources.

Do not rest hot or heavy objects on the appliance.

Clean the filters at least once a week.

Avoid using heaters near the unit.

The unit should be transported in a vertical position. If this is not possible secure the unit at an
angle, do not lie it horizontally.

Before transporting the unit, drain the unit. After transportation, wait at least 6 hours before switching the unit on.

The packaging materials can be recycled. You are therefore recommended to place them in
the special containers for differentiated waste collection.

This appliance is fitted with a special safety device. When the compressor switches off, this
device prevents it from switching on again for at least 3 minutes. 

WARNING:

Changes or modifications not expressly approved by the party responsible for com-

pliance could void the user's authority to operate the equipment.

SAVE THESE INSTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD ONLY

DESCRIPTION
1

air outlet grille

2

control panel

3

castors

handles

5

filter

evaporator air intake grille

7

air exhaust hose housing

8

condenser air intake grille 

power cable

10 

drainage hose

11 

wall flange

12 

air exhaust hose

13

hose adaptor (2 pieces)

14

accessory for wall mounting

15

window bracket grille

16

window bracket cap

17 

window bracket

18 

additional window bracket

19

6 screws

20

window outlet

21 

remote control 

Summary of Contents for PACN 100E













Reviews: