TECHNICAL CHARACTERISTICS:
Power supply voltage
see rating plate
Max. power input
during air conditioning
“
Absorbed power heating
(certain models only)
“
Refrigerant
“
Cooling capacity
“
L
IMIT CONDITIONS
Room temperature for air conditioning
70÷95°F
21÷35°C
Room temperature for heating
MAX 77°F (MAX 25°C)
(certain models only)
A
PPLIANCE DIMENSIONS
:
•
width
22 in
570 mm
•
height
35 in
910 mm
•
depth
18 in
465 mm
•
weight
112 lb
51 kg
19
570 mm
22 in
910 mm
35 in
475 mm
18 in
NEVER TURN THE APPLIANCE UPSIDE DOWN OR ON ITS SIDE. IF THIS
OCCURS, WAIT AT LEAST 4 HOURS BEFORE TURNING THE APPLIANCE ON
(RECOMMENDED TIME IS 24 HOURS).
This appliance is equipped with a 3 prong grounding plug. The plug must be connected into
an outlet that is properly installed and grounded in the accordance with all local codes
and ordinances. Do not modify the plug provided with the appliance. If it will not fit the out-
let, have a proper outlet installed by a qualified electrician.
If the household electrical supply does not meet the above specifications, or if you are not
sure your home has an effective ground, have a qualified electrician or your local electrical
utility company check it and correct any problems.
Transport, filling, cleaning, recovery and disposal of refrigerant should be performed by a
technical service center appointed by the manufacturer only.
The appliance should be disposed of by a specialist center appointed by the manufacturer only.
SAFETY PLUG
The appliance is fitted with a safety plug to protect the power cable.
If power is cut off, unplug from the socket and make sure the power cable is undamaged.
If the cable is damaged, call the service center immediately.
If power cuts off frequently and the power cable is undamaged, contact a qualified electrician.
OPERATION OF THE SAFETY PLUG
If the safety device incorporated in the plug trips and cuts off the power supply, check
that the power cable and plug are not damaged.
If the power cable is undamaged, to restore operation press the "RESET" button.
To verify correct operation of the plug, press the "TEST" button periodically and make sure
the appliance disconnects. If this is not the case, contact the service center.
To restore operation, press the "RESET" button.
