25
Figure 24
AUTOMATIC OVEN COOKING
To cook food automatically in the oven, it is necessary to:
1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven cooking program.
These operations are performed as follows:
1.Set the length of the cooking time by pushing the
button and the
button to advance, or
to go back if you have passed the desired time (fig.
24).
The
AUTO
and the
symbol will be on.
2.Set the end of the cooking time by pressing the
button (the cooking time
already added to the clock time will appear), and the
button (fig. 25); if you
pass the desired time you may get back by pushing the
button.
After this setting, the
symbol will go off.
If after this setting, the
AUTO
flashes on the panel and a buzzer sounds, it means
there was an error in the programming. If this is the case, modify the end of cook-
ing time or the cooking time itself by repeating the procedure above.
3.Set the temperature and the cooking program by using the switch and thermostat
knobs of the oven (see specific chapters).
The oven is now set to turn on and off at the programmed times.
During cooking, the
symbol remains on. By pushing the
button you can
see the time that remains until the end of cooking.
The cooking program may be cancelled in any time by pushing
.
At the end of the cooking time the oven will turn off automatically, the
symbol
will turn off,
AUTO
will flash and a buz zer will sound, which can be turned off by
pushing any of the but tons.
Turn the temperature and thermostat knobs to zero and set the programmer to “man-
ual” by pressing the
button.
Attention:
A power failure resets the clock back to zero and cancels the set pro-
grams.
After a power failure, three zeros will flash on the panel.
Summary of Contents for MULTIFUNCTION BUILT-IN OVEN
Page 36: ...Cod 1103680 1...
