12
LIGHTS
EXPLANATION OF LIGHTS
OPERATION
on
The bean container (A2) is not inserted Insert bean container or check that is completely locked.
The container is correctly inserted when the arrow is
lined up with the symbol and you hear a “click”.
flashing
The finess of the grind regulation is in-
correct (or out of correct range)
Move the selector within the 8 levels from coarse to
fine, keeping in mind to:
• Always adjust the coffee mill during the grinding
• Adjust one grinding level at a time and make at
least 5 coffees before adjusting again
OUT of correct
range
Correct
range
on
Presser lever (A20) is not in the correct
position
Turn the lever back in place.
flashing
Pressing is needed
The coffee has just been ground and the filter holder
is attached to the coffee mill
The portafilter (C1) has been detached
from the coffee mill without pressing
Detach the portafilter and press the coffee as de-
scribed in section “3.2 The perfect dose” “add the
preground coffee in the filter”
The portafilter has been detached be-
fore grinding has ended or pressing has
been performed too quickly
Repeat grinding
The slide of coffee grinder is clogged
Clean as described in section “8.5 Cleaning the
“Smart tamping station”” and section “11. Trouble-
shooting” in correspondence to the picture.
The burrs are blocked by foreign matter Remove the foreign matter and clean the burrs as de-
scribed in section “8.3 Cleaning the burr”.
on (red)
Descaling must be performed
Descale the appliance as described in section “10. Descaling”
flashing (red) +
flashing (orange)
Descaling is underway
Complete the operation as described in section “10.
Descaling”: the light comes white when the rinsing
cycle of descaling is underway
on (red) +
on
(white)
The rinsing cycle of descaling must be
performed
…
→