8
DESCALING
If the water in your area is hard, limescale builds up over time.
These deposits may affect correct operation of the appliance.
You are recommended to descale the coffeemaker when two
buttons (F) and (G) flash simultaneously, which is approximately
every 60 cycles. If limescale visibly builds up in the water tank
prior to the buttons flashing and you would like to activate the
descaling process yourself, you will need to push and hold both
buttons (F & G) simultaneously for 2 seconds.
• To descale, always use De’Longhi descaler available at
Delonghi.com.
• Pour 3.4 oz (100 ml) De’Longhi descaler in the water tank
and add fresh water up to 8 cup (max) level.
• Place the empty carafe on the warming plate and hold for
2 seconds both the buttons (F & G) simultaneously. The
descaling process will begin.
• Once the descaling cycle is complete the lights on the two
buttons will turn off. Rinse the machine by following the
instructions in the “First Use” section on page 6.
• Failure to clean as described above invalidates the War-
ranty.
TECHNICAL DATA
Mains voltage: 120V ~ 60Hz
Absorbed power: ICM17270
1200W
Weight:
5.38 lbs
TROUBLESHOOTING
Problem
Probable cause
Solution
C o n t i n u o u s
blinking of SCA
Golden Cup light
button (F)
Empty tank error
To reset the alarm
unplug the
appliance for at
least 30 minutes.
Water overflowing
from filter holder
to the carafe
Ground Coffee
is too fine or too
much
Use a coarser
grind size or
reduce the
amount of coffee
used
Coffee residue in
the carafe
Ground coffee is
too fine or there
is too much, or
missing paper
filter
Use a coarser
grind size or
reduce the
amount of coffee
used. Always use
a # 4 cone filter
inside the filter
holder.