4
5
The appliance emits a beep and a dot flashes on the
display. The appliance resumes operation a few seconds
after being placed in an upright position again.
INTRODUCTION
Thank you for choosing a De’Longhi product.
Please take a few minutes to read these instructions.
This will avoid all risks and damage to the appliance.
DESCRIPTION
A
ON/STAND-BY button
B
+/- Adjustment buttons
C
Oscillation button
D
“ECO PLUS” function button
E
Timer button
F
MODE button (for selecting the operating mode)
G
Power indicator light
H
Back cover with filter
I
Receiver for remote control (certain models only)
USE
Installation
The appliance can be used on any horizontal surface.
Do not overload the electrical circuit. Avoid using the same
socket for other appliances.
Electrical connection
-
Before plugging the appliance into the mains socket,
check that the mains power supply corresponds to the
value indicated on the rating plate and that the mains
power supply is adequate for the load.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/
EEC ON RADIO INTERFERENCE SUPPRESSION.
Operation and use
- Connect the appliance to the power outlet.
- The appliance emits a beep and the power indicator
light (G) also comes on and remains lit while power to
the appliance is on. The appliance goes into STAND-BY.
- Press the ON/STAND-BY button (A) to turn on the appli-
ance. It will begin to heat with the predefined settings.
- Press the MODE button (F) to select one of the following
functions available:
l
Ventilation
In this operating mode only the fan operates, so the ap-
pliance does not heat the room.
l
Anti-freeze
In this operating mode the appliance keeps the room at
a temperature of 7°C to prevent freezing temperatures.
l
Heating 1 and Heating 2
In this operating mode you can set the desired tempera-
ture by pressing the + and - adjustment buttons (B).
-
Heating 1 (minimum power level):
The appliance operates at the minimum power, reduc-
ing noise and energy consumption to the minimum.
-
Heating 2 (maximum power level):
The appliance operates at the maximum power for rapid
heating of the room.
- To turn off the appliance press button ON/STAND-BY (A).
The display could show the count down for about 6 sec-
onds. To completely turn off the appliance, remove the
plug from the socket.
Please note:
The display can show the temperature in
both °C and °F. To change the temperature scale, press and
hold the + key for few seconds, then release.
ECO PLUS
function
In this operating mode the appliance will automatically set
the power level to guarantee the best comfort reducing the
energy consumption.
The maximum temperature setting is 26 °C. To activate this
function, press the ECO PLUS button (D).
Oscillation button
If you want the appliance to distribute the airflow over a larg-
er area, press the oscillation button (C)
. The appliance
will then oscillate right and left. To stop the oscillation in the
desired position, just press oscillation button (C) again.
24-HOUR DIGITAL TIMER
This function can be activated from any operating mode.
Delayed switch-on:
with the appliance in the STAND-BY
position, press the timer button (E) .
The display shows the symbol and the time remaining
before switch-on. To set the timer, use the + and - adjust-
ment buttons (B), then wait a few seconds for the program-
ming to be set. The display returns to show for stand-by
and the symbol to indicate you have set the timer.
When the programmed time has been reached, the appliance
turns on with the same settings it had during the previous
operation.
Delayed shut-off:
With the appliance on, press the timer
button (E) .
The display shows the symbol and the time remaining
before shut-off. To set the timer, use the + and – adjustment
buttons (B), then wait a few seconds for the programming to
be set. The display returns to show the current settings and
the symbol
to indicate you have set the timer.
