8
If you want to go back to operation without the timer, press
the timer button (E) twice. The timer symbol
disappears
from the display.
NOTE
: Timer can be set in 30 minutes intervals from 30
minutes to 10 hours, and in one hour increments thereafter.
Using the remote control
The remote control functions correspond to those on the
control panel.
See the section “Operation and Use" on the previous page for
a description of the functions.
NOTE
: Before using remote control, you must remove plastic
tab from base of remote.
Important!
This product contains a button battery.
If swallowed, it could cause severe injury or death in just 2
hours. Seek medical attention immediately.
Replacing the remote control battery
-
Extract the battery holder on the back of the remote
control (see figure below).
- Insert a battery type 3V CR2025 into the holder, making
sure the polarity is correct (+ and -), then reinsert the
holder into the back of the remote.
The remote control is ready for use.
Please note:
If the remote control is disposed of or
replaced, the battery must be removed and disposed of in
accordance with local recycling regulations as batteries are
harmful to the environment.
Do not throw the battery into an open flame as it may ex-
plode or release hazardous liquids.
PU
SH
REMOVE
OPEN
PUSH
ADDITIONAL SAFETY FEATURES
1.
Overheating protection:
a safety device switches the
heater off if it accidentally overheats (e.g.: air intake and
outlet grilles obstructed). In this case remove the plug
from the power outlet and leave it unplugged for a few
minutes, eliminate the cause of overheating, then plug
the fan heater back and turn it on again. If the appliance
doesn't work please contact the De'Longhi Customer
Service.
2.
Tip over safety switch:
a safety tip-over switch
turns the heater off if it tips over or is positioned in an
improper way that could jeopardize safety.
After the appliance has been restored in the vertical
position, it will automatically go into STANDBY mode.
Please note:
To avoid overheating the appliance, do
not cover it in any way.
TROUBLESHOOTING
In case “
PF
” is displayed and a warning sound is emitted,
there is a fault with the temperature sensor. If the problem
persists contact DeLonghi customer service.
If the appliance shuts off unexpectedly:
- Check that the appliance is receiving power.
- Check that the appliance is in the vertical position and
on a flat surface, as the safety tip-over switch may have
been tripped.
- Check the temperature set and the timer: the appliance
may be off because the set temperature has been
reached or the time set on the timer has elapsed.
MAINTENANCE
- Before carrying out any maintenance, always unplug
from the outlet.
- During the season when the appliance is in use, clean
the air intake and outlet grilles regularly using a vacuum
cleaner.
- Never use abrasive powders or solvents to clean the
appliance.
TECHNICAL CHARACTERISTICS
Supply voltage
See rating label
Absorbed power
“
