4
OPERATION AND USE
1) SETTING THE CLOCK
For the first time, set the clock to the correct time, proceeding as follows:
• Press the button “
h
” until the display shows the correct hour setting.
• Press the button “
min
” until the display shows the correct minute setting.
When setting the clock time, the numbers will flash on the display.
The flashing numbers will continue for a few seconds until the adjustment has finished.
Once the numbers stop flashing the clock will start working.
To change the time, press and hold the “
h
” or “
min
” button for at least 5 seconds or
until the numbers are flashing. Then proceed as above to modify both hours and minu-
tes.
2) MANUAL OPERATION
To operate the appliance in “manual” mode, press the “ON MODE” button.
To set the required power level: press the “ON MODE" button, and then press again one or
more times within 5 seconds to select the power level, as per the following sequence:
Maximum power
Medium power
Minimum power
Off
If Maximum power has been selected, adjust the “ +” or ” -” button to the desired comfort
temperature, from 42 to 95°F (5 to 35°C). By pushing once the “ +” or “ -” button the desi-
red temperature (shown on the right side of the display) will increase or decrease of 1°F.
Press and hold the button to move through the temperature mode quickly.
correct time
Set temperature
set temperature
correct time
