background image

11

   

2 hours

   

3 hours

4.  press the 

 icon (B12) to confirm (or   

 (B10) to 

exit without making the modification).  The lights/icons go 

off. 

The auto-off time is now programmed. 

ENERGY SAVING

Use this function to enable or disable energy saving. This mode 
is active by default, reducing energy consumption while the ma-
chine is on in compliance with current European regulations.  To 
change the setting, proceed as follows:
1.  With the appliance off (standby), but the main switch 

pressed (fig. 4);

2.  press and hold the 

icon (B13) until the icon lights up;

3.  press the  

 icon (B12) to select energy saving or 

 

(B10) to deselect it. 

The energy saving setting is now programmed. 

 Please note! 

•  When in energy saving mode, a few seconds may elapse 

before the first coffee is delivered as the appliance must 
heat up again.

DEFAULT VALUES (RESET)

This function resets all settings (temperature, auto-off, water 
hardness, energy saving and all quantity settings are reset to 
the default values). 
1.  With the appliance off (standby), but the main switch 

pressed (fig. 4);

2.  press and hold the 

icon (B15) until the icons on the 

touch screen (B) come on;

3.  press the 

 icon (B12) to reset the default values (or

 

B10) to exit without making the modification).  The icons 

go off. 

The settings and quantities have been reset to the default 
values.

MAKING COFFEE 

Selecting the coffee taste

Turn the coffee taste selection dial (B9) to set the required taste. 
Turning it clockwise increases the quantity of coffee beans the 
appliance will grind and therefore the strength of the coffee 
obtained. 
Turn the dial to MIN for an extra mild coffee and to MAX for an 
extra strong coffee. 

 Please note : 

•  The first time you use the appliance, you will need to make 

a number of coffees to identify the correct dial position 
through trial and error. 

•   Do not turn the dial too far towards MAX, otherwise the 

coffee may be delivered too slowly (a drop at a time), par-
ticularly when making two cups of coffee at the same time. 

Selecting the quantity of coffee in the cup 

The appliance is set by default to automatically make the fol-
lowing quantities of coffee:

coffee requested 

icon 

quantity delivered

1 short coffee 

(

40ml)

1 long coffee 

(

120ml)

2 short coffees 

(

40ml) x2

2 long coffees 

(

120ml) x2

To change the quantity of coffee the appliance delivers auto-
matically into the cup, proceed as described below: 
-   press and hold the  

icon (B2) or  

icon (B6)

(depending on the quantity you want to modify) until the 

icon flashes and all the alarm lights flash 4 times. When the 

appliance starts delivering coffee, release the icon;

-   when the coffee in the cup reaches the required level, press 

the same icon again to memorise the new amount.

When the icon is pressed again, the new quantities have been 
memorised.

 Please note! 

Programming the one coffee quantity also programmes the 
quantity of coffee in the corresponding two cups. 

Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and 
should not require regulating initially.
However, if after making the first few coffees you find that the 
coffee is either too weak and not creamy enough or delivery is 
too slow (a drop at a time), this can be corrected by adjusting 
the grinding adjustment dial (fig. 8).

 Please note! 

The grinding adjustment dial must only be turned when the 
coffee mill is in operation.

Summary of Contents for ETAM29.51X






















Reviews: