background image

20

PRoBLeM 

PossIBLe cAUse

soLUtIon

Coffee does not come 

out of one of the 

spouts.

• 

The spouts are blocked. 

• 

Clean the spouts with a toothpick. 

The coffee does 

not come out of the 

spouts, but from 

around the service 

door.

• 

The holes in the spouts are clogged with 

dry coffee dust

• 

The coffee guide inside the service door 

is blocked and cannot swing.

• 

Clean the spouts with a toothpick, 

sponge or hard bristled kitchen brush.

• 

Thoroughly clean the coffee guide, 

particularly near the hinges.

The frothed milk has 

large bubbles

• 

The milk is not cold enough or is not 

semi-skimmed.

• 

You should ideally use skimmed or semi-

skimmed milk at refrigerator temperature 

(about 5°C).  If the result is not as you 

wished, try changing brand of milk.

The milk is not frothed

• 

Cappuccino maker dirty. 

• 

Clean as described in the section 

“Cleaning the cappuccino maker after 

use”.

Steam delivery stops

• 

A safety device stops steam delivery 

after 3 minutes.

• 

Wait, then activate the steam function 

again.

The appliance does not 

come on. 

• 

It is not plugged into the mains socket. 

• 

Plug into the mains socket.

• 

The main switch (A2) is not turned on. 

• 

Place the main switch in the I position 

(fig. 3).

When the steam/hot 

water knob is turned to 

the l position, steam/

hot water is not delive-

red from the cappucci-

no maker

• 

The holes in the cappuccino maker and/

or steam nozzle are blocked

• 

Clean the cappuccino maker as 

described in the section “Cleaning the 

cappuccino maker after use”.

The infuser assembly 

cannot be removed for 

cleaning.

• 

The appliance is on or has not 

completed the turning off cycle.

• 

The infuser can only be removed when 

the appliance has been turned off 

correctly (see the section “Turning off”). 

Summary of Contents for ESAM03.110
















Reviews: