GB
B7.
Aroma selection button : press
until the light corresponding to the type
of coffee you want to make comes on.
pre-ground coffee
extra-mild taste
mild taste
standard taste
strong taste
extra-strong taste
B8.
steam or hot water selection
button.
(When you access the MENU: press the
"ESC" button to exit from the selected
function and go back to the main
menu).
B9.
P button to access the menu
B10.
button: turns the appliance on and
off
Explanation of lights
Indicates the need to descale the
appliance.
The Steam function is selected.
The Hot Water function is selected.
The Auto-Start function is active.
The water filter is exhausted. Replace
it.
An alarm is displayed (see "Explanation
of lights").
Indicates the button to press to confirm
the choice in the menu.
Indicates the button to press to exit the
menu or cancel the selected function.
PRELIMINARY CHECKS
Controls after transport
After removing the packaging, make sure the pro-
duct is complete and undamaged and that all
accessories are present.
Do not use the appliance if it is visibly damaged.
Contact the technical service centre.
Installing the appliance
Important!
When installing the appliance, respect the follo-
wing safety warnings:
•
The appliance gives off heat. Leave a free
space of at least 3 cm around the sides and
back of the appliance and at least 15 cm at the
top. Otherwise the heat could be trapped and
damage the machine.
•
Water penetrating the appliance could cause
damage.
Do not place the appliance near taps or sinks.
•
The appliance could be damaged if the water
it contains freezes. Do not install the applian-
ce in a room where the temperature could
drop below freezing point.
•
Arrange the power cable in such a way that it
cannot be damaged by sharp edges or contact
with hot surfaces (e.g. electric hot plates).
Connecting the appliance
Important!
Check that the mains power
supply voltage corresponds to the value indicated
on the rating plate on the bottom of the appliance.
Connect the appliance to an efficiently earthed and
correctly installed socket with a minimum current
rating of 10A only.
If the power socket does not match the plug on
the appliance, have the socket replaced with a sui-
table type by a qualified professional.
9
