16
1. accendere la macchina.
2. Press the
MENU
button to enter the settings menu. Press
the or button until “descale” is displayed;
3. Press the
OK
button. “descale Confirm?” is displayed. Press
OK
to enable the function.
4. The message “Add descaler Press OK” is displayed.
5. Before confirming, empty the water tank (a13).
Pour the descaler diluted with water (respecting the
proportions indicated on the descaler pack) into the water
tank and replace the tank in the appliance.
6. Place an empty container with a minimum capacity of 1.5
litres under the hot water spout.
Important! Danger of burns
hot water containing acid flows out of the hot water spout.
avoid contact with splashes of water.
7. Confirm with the
OK
button.
8. “TURN STEAM KNOB” is displayed.
9. after turning the knob to the
I
position (fig. 4), “descale
Press OK” is displayed.
10. after confirming by pressing
OK
, the message “descale
underway” is displayed.
The descale programme starts and the descaler liquid
comes out of the water spout.
The descale programme automatically performs a series
of rinses and pauses to remove limescale deposits from
inside the machine.
After about 30 minutes, “TURN STEAM KNOB” is displayed.
When the steam knob is turned to the 0 position, “rinsing Fill
TANK” is displayed.
11. The appliance is now ready for rinsing through with
clean water. remove the water tank, empty, rinse under
running water, fill with clean water and replace. “TurN
STEAM KNOB” is displayed. When the steam knob is
turned to the I position, “Rinsing... Press OK” is displayed.
12. empty the container used to collect the descaler solution
and replace it under the hot water spout.
13. Press the
OK
button to start rinsing. hot water flows out
of the spout and the message “rinsing... Please wait” is
displayed.
14. When the water tank is completely empty, “TurN STeaM
KNOB” is displayed.
15. When the steam knob is turned to the 0 position, the
appliance goes off.
To use it again, turn the appliance on by pressing the
button.
SETTING WATER HARDNESS
The deSCale message is displayed after a period of time
established according to water hardness.
The machine is set by default for a hardness value of 4 (very
hard water).
The machine can also be programmed according to the actual
hardness of the mains water in the various regions, varying the
frequency with which the message is displayed.
Measuring water hardness
1. remove the “ToTal hardNeSS TeST” indicator paper from
its pack.
2. immerse the paper completely in a glass of water for one
second.
3. remove the paper from the water and shake lightly. after
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. each square corresponds to
one level.
level 1 - soft water
l
level 2 - slightly hard water
ll
level 3 - hard water
lll
level 4 - very hard water
llll
Set water hardness
1. Press the
MENU
button to enter the settings menu.
2. Press the or button and select “Water hardness”.
3. Confirm the selection by pressing the
OK
button.
4. Press the or button to set the water hardness
identified using the indicator paper (see figure in the
previous section).
5. Press the
OK
button to confirm the setting.
6. Press the
ESC
button to exit the menu.
The machine is now reprogrammed with the new water
hardness setting.
TECHNICAl SPECIFICATION
voltage:
220-240 v~ 50/60 hz max. 10a
absorbed power:
1350W
Pressure:
15 bar
Water tank capacity:
1,7 l
Size: lxhxd:
282x374x441 mm
Cable length:
1,5 m
Weight:
11,4 Kg
Max. beans container capacity
250 g
The appliance complies with the following eC directives:
• Stand-by Directive no. 1275/2008
• Low Voltage Directive 2006/95/EC and subsequent
amendments;
• EMC Directive 2004/108/EC and subsequent
amendments
• Materials and accessories coming into contact with food
conform to the provisions of eC regulation 1935/2004.
DISPOSAl
important information for correct disposal of the
product in accordance with eC directive 2002/96/eC.
at the end of its working life, the product must not
be disposed of as urban waste. it must be taken to a
special local authority differentiated waste collection centre or
to a dealer providing this service. disposing of a household
appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered
to obtain significant savings in energy and resources.as a
reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled
dustbin.
