23
ERROR
MESSAGE ON
DISPLAY
DESCRIPTION
POSSIBLE
PROBLEMS
SOLUTION
E0:11
Err
Temperature probe
malfunction
The electronic control
detected a malfunc-
tion on temperature
probe
Record the error number.
Reset the control by pressing START/STOP button (H) for
2 seconds and disconnect the plug from wall outlet.
The temperature probe needs to be replaced.
Contact a De’Longhi customer service reporting the error
number.
E0:12
Err
Temperature probe
malfunction
The electronic control
detected a malfunc-
tion on temperature
probe
Record the error number.
Reset the control by pressing START/STOP button (H) for
2 seconds and disconnect the plug from wall outlet.
The temperature probe needs to be replaced.
Contact a De’Longhi customer service reporting the error
number.
E0:21
Err
Target temperature
not reached:
The oven cannot reach
the target tempera-
ture in a reasonable
time range
The electronic control
detected an excessive
time to reach the
target temperature
inside the oven
Record the error number.
Reset the control by pressing START/STOP button (H) for
2 seconds and disconnect the plug from wall outlet.
First check that the oven door has been closed during
the use.
If door is kept open while in use , the oven cannot reach
the target temperature.
If oven door was properly closed, the heating elements
could be damaged.
Contact a De’Longhi customer service reporting the error
number.
E0:22
Err
Over temperature:
The oven reaches
excessive temperature
The electronic control
detected an excessive
temperature inside
the oven
Record the error number.
Reset the control by pressing START/STOP button (H) for
2 seconds and disconnect the plug from wall outlet.
The electronic control could be damaged.
Contact a De’Longhi customer service reporting the error
number.
E0:27
Err
Unexpected heating:
The temperature
probe detected a
temperature rise when
heating elements
should be OFF
The electronic control
detected an unexpect-
ed temperature rise
inside the oven, when
heating elements
should be not
energized
Record the error number.
Reset the control by pressing START/STOP button (H) for
2 seconds and disconnect the plug from wall outlet.
This error may be displayed when the oven starts the
DEFROST function when it is still warm from a previous
cooking process.
Let the oven cool down before starting the DEFROST
function.
If above case was not, the electronic control could be
damaged.
Contact a De’Longhi customer service reporting the error
number.
TROUBLESHOOTING
