DeLonghi EO12012, Instructions For Use Manual

Page: 5 / 16

4
Electrical connection
A) If your appliance comes fitted with a plug, it will
incorporate a 13 Amp fuse. If it does not fit your
socket, the plug should be cut off from the mains
lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug
after removing the fuse: do not insert in a 13 Amp
socket elsewhere in the house as this could cause a
shock hazard.
With alternative plugs not incorporating a fuse, the
circuit must be protected by a 15 Amp fuse. If the
plug is a moulded-on type, the fuse cover must be
re-fitted when changing the fuse using a 13 Amp
Asta approved fuse to BS 1362. In the event of lo-
sing the fuse cover, the plug must NOT be used until
a replacement fuse cover can be obtained from your
nearest electrical dealer. The colour of the correct
replacement fuse cover is that as marked on the
base of the plug.
B) If your appliance is not fitted with a plug, please
follow the instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the ter-
minal in the plug marked with the letter E or the earth
symbol
or coloured green or green and yellow.
The blue wire must be connected to the terminal mar-
ked with the letter N or coloured black.
The brown wire must be connected to the terminal mar-
ked with the letter L or coloured red.
Disposal
In compliance with European directive 2002/96/EC, the ap-
pliance must not be disposed of with household waste, but
taken to an authorised waste separation and recycling centre.