modulate between medium, minimum power and OFF to maintain a selected temperature.
Note:
the display will always show the power setting you have chosen, not the one it is cur-
rently working at.
FROST STAT FUNCTION
Press the “
ON MODE
” button (it is recommended to select the maximum power level). Set the
temperature to 5°C with the “ -” button. When set in this way, the appliance will switch on
automatically only if the room temperature falls below 5°C, thereby preventing freezing, at
minimum energy consumption.
N.B.
This function is not guaranteed in the event of power failures, lasting more than 2 minutes.
3) PROGRAMMING THE ELECTRONIC TIMER
The timer allows you to set 2 programmes in a 24 hour period.
To programme the timer:
1-
Press the “ AUTO” button, this accesses the 1st programme (programme A). The yellow
timer ON lamp will light up.
2-
Set the start time for your programme by pressing the “HOUR” button to set the hour and the
“MIN” button to set the minutes.
3-
To select how long you require the heater to be on, push the “+min“ button repeatedly until
your chosen operating timespan appears. The time periods you are able to choose from are
(30’, 45’, 1hr, 2hr, 4hr,8hr (max).
4-
To program a second time period (programme B), press the ” AUTO” button twice and
then proceed as above to select the start hours and minutes. The set time will be the same as
for the first programme. When the operating time is changed, the time of both programmes
is updated.
Important:
the
operating time
period must be the same as in Programme A. If the operating
time is changed e.g. from 45 min. to 1hour, both programmes will operate for 1 hour.
5
O
AUTO
:
O
:
AUTO
AUTO
°
C
0
AUTO
:
°
C
Timer lamp on
Display when setting
programme A
Display when setting
programme B
Display when setting for
45 mins operating time
°
C
MAN
:
5710004200 hm uk 31-01-2002 14:43 Pagina 5
